Set High-voltage test probe SP 02 and SP 03
SP 02 / SP 03-2
- Version: 1 piece SP 02 without start switch and 1 piece SP 03 with start switch
- Test voltage: Contour / connection: 25,000 V DC
- Max. Operating voltage: 10,000 V DC / 8,000 V AC
- Suitable for all high-voltage testers
The most important procedure in all safety tests is the high-voltage test. This test is very often carried out manually, with the safety test probe forming the link between the person, the high-voltage test device and the DUT. It is intended to safely contact the high voltage, but also to protect the person from life-threatening contact with the high voltage.
The SP 02 and SP 03 safety test probes fully meet these requirements. In addition, great importance was attached to the ergonomics and handling of the probes. Especially when testing hundreds of times a day, this point plays a decisive role in test comfort and therefore also test safety. The high-voltage test probes from SPS electronic are available with or without a start switch and with different cable lengths.
