Do you have a question?
What is the center frequency of this antenna?
For which type of test objects is this accessory suitable?
How is the power supplied to this active antenna?
Which testing devices are compatible with this antenna?
How are industrial interference signals suppressed during measurement?
ask something different
Partial discharge measuring antenna MW 40
MW 40
- Accessories for the surge tester ST 4000B / ST 3820K
- Active microwave antenna
- Medium frequency 1.575 GHz
- For open DUTs
- Supply via the test device
- CE-compliant design in accordance with EN 50191
Warranty extension
i
Active microwave antenna, for open DUTs. The best way to measure partial discharges is via a microwave antenna. The active antenna is supplied via the test device. A narrow-band filter at 1.575 MHz (GPS range) center frequency optimally suppresses industrial interference signals. This area is reserved worldwide for the use of GPS devices. Very precise, repeatable measurements are possible.
Suitable for
Surge tester ST 4000B
- Desktop device 19" / 6 HU
- Surge voltage test: 100 - 6.000 V
- Surge capacity: 18 nF, optional: 40 nF, 100 nF, 200 nF
- Partial discharge measurement according to IEC 61934
- Evaluation method: Error area, differential error area, tolerance band method
- High voltage test DC: 100 - 6,000 V / 10 mA
- Insulation measurement DC: 100 - 6,000 V / 10 GΩ / kV
- Resistance measurement (optional): 20 mΩ to 200 kΩ, max. 1A
- Internal matrix: 4 phases + PE, 4-wire
$22,550.84
Surge tester ST 3820K
- Plug-in 19" / 3 HU
- Surge voltage test: 100 - 6.000 V
- Surge capacity: 18 nF, optional: 40 nF, 100 nF , 200 nF
- Evaluation method: Error area, differential error area, tolerance band method
- Insulation measurement DC: 100 - 6,000 V / 100 GΩ/kV
- High voltage test DC: 100 - 6,000 V / 10 mA
- Partial discharge measurement: 100 - 6,000 V, according to IEC 61934 Evaluation of inception and extinction voltages (PDIV, RPDIV, PDEV & RPDEV)
- Internal matrix: L, N, + PE Guard
$11,239.71
